China OEM Electronic Parts Manufacturing - Customized PC+ABS Projector Plastic Injection Molded Housing – DTG Detail:
ABS + PC combines the excellent characteristics of the two materials. The Synthetic material is suitable for the housing of electronic products, with good overall performance, high impact strength, chemical stability, and electrical properties.
This is an office projector housing, composed of an upper cover, a middle main body, and a lower cover. The white matte surface has a very advanced appearance. The upper and lower covers are designed with artistic lines to completely avoid the problem of misalignment. The surrounding slider joint lines are designed with grooves. The position, so that the bonding line is completely invisible, and the concave shape with a diameter of 1.25mm is evenly distributed to create a perfect pattern; the circle is electroplated in bright silver at the position of the lamp socket, which retains a shiny luster, and has good stability in the injection molding process. The yield rate is as high as 99%.
Texture – Mold texture can also vary greatly in their texture. Some will appear velvety and soft, while others will appear fluffy, and still others seem grainy, slimy or spongey. It all depends on the type of mold and the surface it’s growing on.
Mold Surface Textures Made by Blasting. Abrasive blasting helps to create rougher finishes.
This type of texturing makes use of glass beads or sand. This corresponds to the SPI surface finish Category D. The random nature of the blasting and spraying results in a non-directional and uniform finish.
That’s the introduction of this product, if you have similar design need to make prototyping or mold, warmly welcome to contact us at any time.
DTG Mould Trade Process |
|
Quote |
According to sample, drawing and specific requirement. |
Discussion |
Mold material, cavity number, price, runner, payment, etc. |
S/C Signature |
Approval for all the items |
Advance |
Pay 50% by T/T |
Product Design Checking |
We check the product design. If some position is not perfect, or can not be done on the mould, we will send customer the report. |
Mould Design |
We make mould design on the basis of confirmed product design, and send to customer for confirmation. |
Mold Tooling |
We start to make mold after mold design confirmed |
Mold Processing |
Send report to customer once each week |
Mold Testing |
Send trial samples and try-out report to customer for confirmation |
Mold Modification |
According to customer’s feedback |
Balance settlement |
50% by T/T after the customer approved the trial sample and mould quality. |
Delivery |
Delivery by sea or air. The forwarder can be designated by your side. |
Sale Services
Pre-sale:
Our company provide good salesman for professional and promptly communication.
In-sale:
We have strong designer teams, will support customer R&D, If the customer send us samples, we can make product drawing and do the modification as per customer request and send to customer for approval. Also we will accord our experience and knowledge to provide customers our technological suggestions.
After-sale:
If our product have quality problem during our guarantee period, we will send you free for replace the broken piece; also if you have any issue in using our moulds, we provide you professional communication.
Other Services
We make the commitment of service as below:
1.Lead time: 30-50 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D
7.Spare parts: 30%, 50%, 100%, according to specific requirement
8.Free sample: according to specific requirement
We guarantee to provide the best and quick mold service for customers!
1 |
Best design,competitive price |
2 |
20 years rich experience worker |
3 |
Professional in design & making plastic mould |
4 |
One stop solution |
5 |
On time delivery |
6 |
Best after-sale service |
7 |
Specialized in kinds of plastic injection molds. |
DTG–Your reliable plastic mould and prototype supplier!
Product detail pictures:
Related Product Guide:
Our firm has been concentrating on brand strategy. Customers' satisfaction is our best advertising. We also offer OEM provider for China OEM Electronic Parts Manufacturing - Customized PC+ABS Projector Plastic Injection Molded Housing – DTG, The product will supply to all over the world, such as: Philippines, Swiss, Gabon, Our products are mainly exported to Southeast Asia, the Middle East, North America and Europe. Our quality is surely guaranteed. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
By Moira from Kenya - 2018.12.10 19:03
The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
By Denise from Thailand - 2018.12.11 14:13