Factory Cheap Hot Plastic Mold Processing - OEM Plastic Injection Tooling Mould of Storage Box Shell – DTG Detail:
This type of mould has three main parts or plates, which on opening are separated one from the other to give two daylights. The moulding drop from one daylight and the feed system, in the case of a cold runner type, drops from the other. This facility is extremely useful as it means that the feed system can be segregated from the components by arranging, for example, for the feed system to drop onto one conveyor and the moulding to drop onto another.
To sum up, two plate molds are the most commonly used injection mould. It consists of one parting plane and mold splits into two halves, whereas three plate injection mold consists of two parting planes and mold splits into three sections. Compared to a two-plate mould，this type of mould, therefore, has an additional plate which floats between the fixed and moving plates. The feed system is contained between the fixed plate and the center plate whereas the moulding arc formed between the moving plate and the center plate. The cavity is usually cut in the center or floating plate and each cavity is fed via a pin-point gate from secondary sprue which are also cut into the plate.
|
DTG Mould Trade Process |
|
|
Quote |
According to sample, drawing and specific requirement. |
|
Discussion |
Mold material, cavity number, price, runner, payment, etc. |
|
S/C Signature |
Approval for all the items |
|
Advance |
Pay 50% by T/T |
|
Product Design Checking |
We check the product design. If some position is not perfect, or can not be done on the mould, we will send customer the report. |
|
Mould Design |
We make mould design on the basis of confirmed product design, and send to customer for confirmation. |
|
Mold Tooling |
We start to make mold after mold design confirmed |
|
Mold Processing |
Send report to customer once each week |
|
Mold Testing |
Send trial samples and try-out report to customer for confirmation |
|
Mold Modification |
According to customer’s feedback |
|
Balance settlement |
50% by T/T after the customer approved the trial sample and mould quality. |
|
Delivery |
Delivery by sea or air. The forwarder can be designated by your side. |
Sale Services
Pre-sale:
Our company provide good salesman for professional and promptly communication.
In-sale:
We have strong designer teams, will support customer R&D, If the customer send us samples, we can make product drawing and do the modification as per customer request and send to customer for approval. Also we will accord our experience and knowledge to provide customers our technological suggestions.
After-sale:
If our product have quality problem during our guarantee period, we will send you free for replace the broken piece; also if you have any issue in using our moulds, we provide you professional communication.
Other Services
We make the commitment of service as below:
1.Lead time: 30-50 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D
7.Spare parts: 30%, 50%, 100%, according to specific requirement
8.Free sample: according to specific requirement
We guarantee to provide the best and quick mold service for customers!
|
1 |
Best design,competitive price |
|
2 |
20 years rich experience worker |
|
3 |
Professional in design & making plastic mould |
|
4 |
One stop solution |
|
5 |
On time delivery |
|
6 |
Best after-sale service |
|
7 |
Specialized in kinds of plastic injection molds. |
DTG–Your reliable plastic mould and prototype supplier!
Product detail pictures:
Related Product Guide:
We stay with the basic principle of quality initially, services first, steady improvement and innovation to fulfill the customers for your management and zero defect, zero complaints as the quality objective. To perfect our company, we give the goods while using the good high-quality at the reasonable selling price for Factory Cheap Hot Plastic Mold Processing - OEM Plastic Injection Tooling Mould of Storage Box Shell – DTG, The product will supply to all over the world, such as: Egypt, Brazil, Kuwait, With the principle of win-win, we hope to help you make more profits in the market. An opportunity is not to be caught, but to be created. Any trading companies or distributors from any countries are welcomed.
By Alice from Porto - 2017.03.08 14:45
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Jill from Morocco - 2017.08.15 12:36
Send your message to us:
-
OEM Customized Edm - Custom ABS Plastic Inject...
-
Factory supplied Injection Moulding Cover Mould...
-
100% Original Factory Motorcycle Plastic Parts ...
-
2021 wholesale price Medical Injection Molds -...
-
OEM/ODM Supplier Stainless Steel Shell - OEM P...
-
Factory wholesale Plastic Shell Mould - Custom...
