Don ware ko rage gazawar da ake amfani da su gwargwadon yuwuwar, yakamata a lura da waɗannan lamuran yayin zabar da amfani da tsarin mai gudu mai zafi.
1.Zaɓin hanyar dumama
Hanyar dumama na ciki: Tsarin bututun dumama na ciki ya fi rikitarwa, farashi ya fi girma, sassan suna da wahala a maye gurbinsu, buƙatun dumama wutar lantarki sun fi girma. Ana sanya mai zafi a tsakiyar mai gudu, zai samar da madauwari mai gudana, ƙara yawan yanki na capacitor, raguwar matsa lamba na iya zama kamar sau uku na bututun zafi na waje.
Amma saboda nau'in dumama na dumama na ciki yana cikin jikin torpedo a cikin bututun ƙarfe, ana ba da duk zafi zuwa kayan, don haka asarar zafi kaɗan ne kuma yana iya adana wutar lantarki. Idan aka yi amfani da kofa mai ma'ana, ana ajiye tip ɗin jikin torpedo a tsakiyar ƙofar, wanda ke sauƙaƙe yanke gate bayan allura kuma yana sa ragowar ɓangaren filastik ya ragu saboda ƙarancin ƙarancin ƙofar. .
Hanyar dumama waje: Bututun dumama na waje na iya kawar da fim ɗin sanyi kuma rage asarar matsa lamba. A lokaci guda, saboda tsarinsa mai sauƙi, sauƙin sarrafawa, da thermocouple da aka sanya a tsakiyar bututun don sarrafa zafin jiki daidai da sauran fa'idodi, a halin yanzu ana amfani da su. Amma asarar zafi na bututun bututun ƙarfe na waje ya fi girma, ba mai ƙarfi ba kamar bututun zafi na ciki.
2. Zaɓin hanyar ƙofar kofa
Zane da zaɓi na ƙofa kai tsaye yana rinjayar ingancin sassan filastik. A cikin aikace-aikacen tsarin mai gudu mai zafi, bisa ga resin fluidity, gyare-gyaren zafin jiki da buƙatun ingancin samfur don zaɓar nau'in ƙofa mai dacewa, don hana salivation, dripping kayan, yayyo da launi canza mummunan sabon abu.
3.Hanyar sarrafa zafin jiki
Lokacin da aka ƙayyade nau'in ƙofar, kula da canjin zafin jiki na narkewa zai taka muhimmiyar rawa a ingancin sassan filastik. Sau da yawa abubuwan da suka ƙona, lalacewa ko yanayin toshewar tashar tashoshi galibi ana haifar da su ta hanyar sarrafa zafin jiki mara kyau, musamman don robobi masu zafin zafi, galibi suna buƙatar amsa mai sauri da daidai ga sauyin yanayin zafi.
Don haka, ya kamata a saita na'urar dumama da kyau don hana zafi na gida, don tabbatar da cewa na'urar dumama da farantin mai gudu ko bututun ƙarfe tare da ratar don rage asarar zafi, kuma yakamata a yi ƙoƙarin zaɓar na'urar sarrafa zafin jiki mafi ci gaba don saduwa da zafin jiki. bukatun sarrafawa.
4.The zazzabi da matsa lamba ma'auni na manifold lissafi
Manufar tsarin mai gudu mai zafi shine don allurar filastik mai zafi daga bututun injin ɗin allura, wuce ta mai zafi mai zafi a daidai wannan zafin jiki kuma rarraba narke ga kowane ƙofar ƙirar tare da madaidaicin matsi, don haka rarraba zafin jiki. na yankin dumama na kowane mai gudu da kuma matsa lamba na narkewa a cikin kowace kofa ya kamata a lissafta.
Ƙididdigar bututun bututun ƙarfe da ƙorafin tsakiya na hannun hannun riga saboda haɓakar zafi. A wasu kalmomi, ya kamata a tabbatar da cewa tsakiyar layin zafi (fadada) bututun ƙarfe da sanyi (ba a faɗaɗa) hannun ƙofar ƙofar za a iya daidaita shi daidai da daidaitawa.
5.Kididdigar asarar zafi
A ciki mai tsanani mai gudu yana kewaye da goyan bayan sanyaya mold hannun riga, don haka zafi asarar saboda zafi radiation da kuma kai tsaye lamba (gudanar) ya kamata a lissafta a matsayin daidai kamar yadda zai yiwu, in ba haka ba ainihin mai gudu diamita zai zama karami saboda thickening na kwandon shara akan bangon mai gudu.
6.Shigar da farantin gudu
Yakamata a yi la'akari dalla-dalla bangarorin biyu na rufin zafi da matsa lamba. Yawancin lokaci ana saitawa tsakanin farantin mai gudu da matashin samfuri da tallafi, wanda a gefe guda zai iya jure wa matsi na allura, don guje wa nakasar farantin mai gudu da abin yabo na kayan abu, a gefe guda, kuma na iya rage asarar zafi.
7.Maintenance na zafi mai gudu tsarin
Don ƙwanƙwasa mai zafi mai zafi, yin amfani da kulawar rigakafi na yau da kullum na kayan aikin mai zafi yana da matukar muhimmanci, wannan aikin ya haɗa da gwajin lantarki, abubuwan rufewa da haɗawa da binciken waya da tsaftace kayan aikin ƙazanta.
Lokacin aikawa: Yuli-20-2022
