Manufacturer for Hot Runner Mold - OEM Plastic Injection Tooling Mould of Storage Box Shell – DTG Detail:
This type of mould has three main parts or plates, which on opening are separated one from the other to give two daylights. The moulding drop from one daylight and the feed system, in the case of a cold runner type, drops from the other. This facility is extremely useful as it means that the feed system can be segregated from the components by arranging, for example, for the feed system to drop onto one conveyor and the moulding to drop onto another.
To sum up, two plate molds are the most commonly used injection mould. It consists of one parting plane and mold splits into two halves, whereas three plate injection mold consists of two parting planes and mold splits into three sections. Compared to a two-plate mould，this type of mould, therefore, has an additional plate which floats between the fixed and moving plates. The feed system is contained between the fixed plate and the center plate whereas the moulding arc formed between the moving plate and the center plate. The cavity is usually cut in the center or floating plate and each cavity is fed via a pin-point gate from secondary sprue which are also cut into the plate.
|
DTG Mould Trade Process |
|
|
Quote |
According to sample, drawing and specific requirement. |
|
Discussion |
Mold material, cavity number, price, runner, payment, etc. |
|
S/C Signature |
Approval for all the items |
|
Advance |
Pay 50% by T/T |
|
Product Design Checking |
We check the product design. If some position is not perfect, or can not be done on the mould, we will send customer the report. |
|
Mould Design |
We make mould design on the basis of confirmed product design, and send to customer for confirmation. |
|
Mold Tooling |
We start to make mold after mold design confirmed |
|
Mold Processing |
Send report to customer once each week |
|
Mold Testing |
Send trial samples and try-out report to customer for confirmation |
|
Mold Modification |
According to customer’s feedback |
|
Balance settlement |
50% by T/T after the customer approved the trial sample and mould quality. |
|
Delivery |
Delivery by sea or air. The forwarder can be designated by your side. |
Sale Services
Pre-sale:
Our company provide good salesman for professional and promptly communication.
In-sale:
We have strong designer teams, will support customer R&D, If the customer send us samples, we can make product drawing and do the modification as per customer request and send to customer for approval. Also we will accord our experience and knowledge to provide customers our technological suggestions.
After-sale:
If our product have quality problem during our guarantee period, we will send you free for replace the broken piece; also if you have any issue in using our moulds, we provide you professional communication.
Other Services
We make the commitment of service as below:
1.Lead time: 30-50 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D
7.Spare parts: 30%, 50%, 100%, according to specific requirement
8.Free sample: according to specific requirement
We guarantee to provide the best and quick mold service for customers!
|
1 |
Best design,competitive price |
|
2 |
20 years rich experience worker |
|
3 |
Professional in design & making plastic mould |
|
4 |
One stop solution |
|
5 |
On time delivery |
|
6 |
Best after-sale service |
|
7 |
Specialized in kinds of plastic injection molds. |
DTG–Your reliable plastic mould and prototype supplier!
Product detail pictures:
Related Product Guide:
Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for Manufacturer for Hot Runner Mold - OEM Plastic Injection Tooling Mould of Storage Box Shell – DTG, The product will supply to all over the world, such as: Istanbul, Czech republic, Lyon, All our products are exported to clients in the UK, Germany, France, Spain, the USA, Canada, Iran, Iraq, the Middle East and Africa. Our products are well welcomed by our customers for the high quality, competitive prices and the most favorable styles. We hope to establish business relationship with all customers and bring more beautifu colors for the life.
By Leona from Georgia - 2018.09.16 11:31
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Renata from Mexico - 2017.03.07 13:42
