China OEM Customized Plastic Injection Molding Processing – OEM Design Custom High Precision Car Auto ABS/PMMA/POM Plastic Injection Mould with Hot Runner – DTG manufacturers and suppliers

OEM Customized Plastic Injection Molding Processing – OEM Design Custom High Precision Car Auto ABS/PMMA/POM Plastic Injection Mould with Hot Runner – DTG

Short Description:

Product Detail

Product Tags

Feedback (2)

We also supply merchandise sourcing and flight consolidation companies. We now have our very own manufacturing facility and sourcing business. We could present you with almost every kind of product relevant to our solution array for Plastic Holder Mould, Plastic Moulds, Household Products, We've been prepared to cooperate with company friends from at your home and overseas and produce a wonderful future with each other.

OEM Customized Plastic Injection Molding Processing – OEM Design Custom High Precision Car Auto ABS/PMMA/POM Plastic Injection Mould with Hot Runner – DTG Detail:

In injection molding, each cavity in a mold must contain a small opening called a gate, which allows hot plastic to enter the cavity before passing through and around its internal features until filled.

Design side gate is the most generally of mold design, and used well in multi-cavity mold. Its shape is a rectangle or semicircle, and placed at side of the molded product. It can use for a product with small side or middle thickness because gate structure is easy and don need high quality.

This article looks at six of the most common gate types used in injection molding: edge gates, tab gates, direct/sprue gates, hot tip gates, pin gates, and sub gates.

The gate location on an injection molded part leaves a “witness” where the part is separated from the runner system. This is considered an appearance defect and is typically hidden in an inconspicuous location on the part.

Small gates provide a better appearance, but require longer mold time or higher pressure to fill properly. Higher cavity pressures cause more stress to be molded into the part. … In plastic injection molding, if gate size is inadequate the flow rate of the molten resin will be restricted as it tries to move through.

*DTG Mould Trade Process*
Quote	According to sample, drawing and specific requirement.
Discussion	Mold material, cavity number, price, runner, payment, etc.
S/C Signature	Approval for all the items
Advance	Pay 50% by T/T
Product Design Checking	We check the product design. If some position is not perfect, or can not be done on the mould, we will send customer the report.
Mould Design	We make mould design on the basis of confirmed product design, and send to customer for confirmation.
Mold Tooling	We start to make mold after mold design confirmed
Mold Processing	Send report to customer once each week
Mold Testing	Send trial samples and try-out report to customer for confirmation
Mold Modification	According to customer’s feedback
Balance settlement	50% by T/T after the customer approved the trial sample and mould quality.
Delivery	Delivery by sea or air. The forwarder can be designated by your side.

Sale Services

Pre-sale:
Our company provide good salesman for professional and promptly communication.

In-sale:
We have strong designer teams, will support customer R&D, If the customer send us samples, we can make product drawing and do the modification as per customer request and send to customer for approval. Also we will accord our experience and knowledge to provide customers our technological suggestions.

After-sale:
If our product have quality problem during our guarantee period, we will send you free for replace the broken piece; also if you have any issue in using our moulds, we provide you professional communication.

Other Services

We make the commitment of service as below:

1.Lead time: 30-50 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D
7.Spare parts: 30%, 50%, 100%, according to specific requirement
8.Free sample: according to specific requirement

We guarantee to provide the best and quick mold service for customers!

1	Best design,competitive price
2	20 years rich experience worker
3	Professional in design & making plastic mould
4	One stop solution
5	On time delivery
6	Best after-sale service
7	Specialized in kinds of plastic injection molds.

DTG–Your reliable plastic mould and prototype supplier!

Product detail pictures:

Related Product Guide:

To create far more benefit for customers is our company philosophy; customer growing is our working chase for OEM Customized Plastic Injection Molding Processing – OEM Design Custom High Precision Car Auto ABS/PMMA/POM Plastic Injection Mould with Hot Runner – DTG, The product will supply to all over the world, such as: Florida, New Delhi, Namibia, We confirm to public, cooperation, win-win situation as our principle, adhere to the philosophy of make a living by quality, keep developing by honesty , sincerely hope to build up a good relationship with more and more customers and friends, to achieve a win-win situation and common prosperity.

Custom Overmolding