OEM/ODM Manufacturer Plastic Mold - OEM Design Custom High Precision Car Auto ABS/PMMA/POM Plastic Injection Mould with Hot Runner – DTG Detail:
In injection molding, each cavity in a mold must contain a small opening called a gate, which allows hot plastic to enter the cavity before passing through and around its internal features until filled.
Design side gate is the most generally of mold design, and used well in multi-cavity mold. Its shape is a rectangle or semicircle, and placed at side of the molded product. It can use for a product with small side or middle thickness because gate structure is easy and don need high quality.
This article looks at six of the most common gate types used in injection molding: edge gates, tab gates, direct/sprue gates, hot tip gates, pin gates, and sub gates.
The gate location on an injection molded part leaves a “witness” where the part is separated from the runner system. This is considered an appearance defect and is typically hidden in an inconspicuous location on the part.
Small gates provide a better appearance, but require longer mold time or higher pressure to fill properly. Higher cavity pressures cause more stress to be molded into the part. … In plastic injection molding, if gate size is inadequate the flow rate of the molten resin will be restricted as it tries to move through.
|
DTG Mould Trade Process |
|
|
Quote |
According to sample, drawing and specific requirement. |
|
Discussion |
Mold material, cavity number, price, runner, payment, etc. |
|
S/C Signature |
Approval for all the items |
|
Advance |
Pay 50% by T/T |
|
Product Design Checking |
We check the product design. If some position is not perfect, or can not be done on the mould, we will send customer the report. |
|
Mould Design |
We make mould design on the basis of confirmed product design, and send to customer for confirmation. |
|
Mold Tooling |
We start to make mold after mold design confirmed |
|
Mold Processing |
Send report to customer once each week |
|
Mold Testing |
Send trial samples and try-out report to customer for confirmation |
|
Mold Modification |
According to customer’s feedback |
|
Balance settlement |
50% by T/T after the customer approved the trial sample and mould quality. |
|
Delivery |
Delivery by sea or air. The forwarder can be designated by your side. |
Sale Services
Pre-sale:
Our company provide good salesman for professional and promptly communication.
In-sale:
We have strong designer teams, will support customer R&D, If the customer send us samples, we can make product drawing and do the modification as per customer request and send to customer for approval. Also we will accord our experience and knowledge to provide customers our technological suggestions.
After-sale:
If our product have quality problem during our guarantee period, we will send you free for replace the broken piece; also if you have any issue in using our moulds, we provide you professional communication.
Other Services
We make the commitment of service as below:
1.Lead time: 30-50 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D
7.Spare parts: 30%, 50%, 100%, according to specific requirement
8.Free sample: according to specific requirement
We guarantee to provide the best and quick mold service for customers!
|
1 |
Best design,competitive price |
|
2 |
20 years rich experience worker |
|
3 |
Professional in design & making plastic mould |
|
4 |
One stop solution |
|
5 |
On time delivery |
|
6 |
Best after-sale service |
|
7 |
Specialized in kinds of plastic injection molds. |
DTG–Your reliable plastic mould and prototype supplier!
Product detail pictures:
Related Product Guide:
We can always satisfy our respected customers with our good quality, good price and good service due to we are more professional and more hard-working and do it in cost-effective way for OEM/ODM Manufacturer Plastic Mold - OEM Design Custom High Precision Car Auto ABS/PMMA/POM Plastic Injection Mould with Hot Runner – DTG, The product will supply to all over the world, such as: Burundi, Estonia, Grenada, Our factory covers an area of 12,000 square meters, and has a staff of 200 people, among which there are 5 technical executives. We are specialized in producing.We have rich experience in export. Welcome to contact us and your enquiry will be replied as soon as possible.
By Raymond from Belgium - 2017.11.11 11:41
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By tobin from Nepal - 2017.09.30 16:36
