SPI-B2, a standard of surface roughness, SPI b2 is slightly finer than b1 and RA.4-5 made by 400 grit. SPI b3 is comparable to RA.9-10 made by 320 grit. SPI c1 is finer than b3 and RA.10-12 made by 600 stone. SPI c2 is slightly finer than c1 and RA.25-28 made by 400 stone. SPI c3 is comparable to RA.38-42 made by 320 stone.
PA6 is a translucent or opaque milky white particle, with thermoplasticity, good temperature resistance, good aging resistance, good abrasion resistance, good dimensional stability, good mechanical damping ability, good mechanical processing performance, good sliding properties, Excellent wear resistance, generally used in auto parts, mechanical parts, electronic and electrical products, engineering accessories and other products.
This motor fan is widely used. It can be used in computer equipment, low-voltage electrical equipment, numerical control equipment, household appliances, etc. The scientific design of the fan blades and the precision production of molds directly affect the exhaust air volume and the noise of the motor. If the fan blades are eccentric to produce vibration, noise occurs, and the service life is shortened; the choice of nylon material has good wear resistance and can reduce noise. Mass production can be fully automated by robots, which effectively improves productivity. It’s a good design we think.
|
DTG Mould Trade Process |
|
|
Quote |
According to sample, drawing and specific requirement. |
|
Discussion |
Mold material, cavity number, price, runner, payment, etc. |
|
S/C Signature |
Approval for all the items |
|
Advance |
Pay 50% by T/T |
|
Product Design Checking |
We check the product design. If some position is not perfect, or can not be done on the mould, we will send customer the report. |
|
Mould Design |
We make mould design on the basis of confirmed product design, and send to customer for confirmation. |
|
Mold Tooling |
We start to make mold after mold design confirmed |
|
Mold Processing |
Send report to customer once each week |
|
Mold Testing |
Send trial samples and try-out report to customer for confirmation |
|
Mold Modification |
According to customer's feedback |
|
Balance settlement |
50% by T/T after the customer approved the trial sample and mould quality. |
|
Delivery |
Delivery by sea or air. The forwarder can be designated by your side. |
Sale Services
Pre-sale:
Our company provide good salesman for professional and promptly communication.
In-sale:
We have strong designer teams, will support customer R&D, If the customer send us samples, we can make product drawing and do the modification as per customer request and send to customer for approval. Also we will accord our experience and knowledge to provide customers our technological suggestions.
After-sale:
If our product have quality problem during our guarantee period, we will send you free for replace the broken piece; also if you have any issue in using our moulds, we provide you professional communication.
Other Services
We make the commitment of service as below:
1.Lead time: 30-50 working days
2.Design period: 1-5 working days
3.Email reply: within 24 hours
4.Quotation: within 2 working days
5.Customer complaints: reply within 12 hours
6.Phone call service: 24H/7D/365D
7.Spare parts: 30%, 50%, 100%, according to specific requirement
8.Free sample: according to specific requirement
We guarantee to provide the best and quick mold service for customers!
|
1 |
Best design,competitive price |
|
2 |
20 years rich experience worker |
|
3 |
Professional in design & making plastic mould |
|
4 |
One stop solution |
|
5 |
On time delivery |
|
6 |
Best after-sale service |
|
7 |
Specialized in kinds of plastic injection molds. |
DTG--Your reliable plastic mould and prototype supplier!
